Chapter 33-27F-3-1043.4.11.6 Removing the CoolingFan 0004-19441) Remove the screw [1], and disconnect theconnector [2]; then, detach the cooling fan [3].F-3-1053.4.11.7 Removing the Feedmotor 0004-19451) Loosen the 2 screws [1], and move the feed motor[2] down; then, tighten the 2 screws [1] you haveloosened.F-3-106When mounting it, loosen the screws [1] to put itback to its initial position.2) Disconnect the connector [1], and remove the 2screws [2]; then, detach the feed roller [3].F-3-107When mounting it, be sure that that timing belt [1]is properly attached to the pulley [2].F-3-1083.4.11.8 Removing the FeedGuide 0004-55861) Open the open/close guide [1]; then, remove the 2screws [2], and disconnect the connector [3] to detachthe feed guide [4].[1][1][2][3][1][2][3][1][1][2][2] [2][3][1][1][2]
