Chapter 33-4F-3-172) Remove the delivery reversal motor [2].- 2 screws [1]F-3-183.3.4 Pressurization Motor3.3.4.1 Before Removing the Pressurization Motor 0017-64761) Remove the front cover. (page 3-1)Reference[Removing the Front Cov-er]3.3.4.2 Removing the Pressurization Motor 0017-64821) Remove the harness guide [3].- 1 screw [1]- 3 connectors [2]F-3-192) Remove the locking motor drive unit [3].- 3 screws [1]- 1 connector [2]F-3-203) Remove the 2 screws [1].F-3-214) Remove the delivery reversal motor [3].- 2 screws [1]- 1 connector [2]F-3-22When mounting it, be sure that the motor harness is not trapped.3.3.5 Drive Unit3.3.5.1 Before Removing the Drive Unit 0017-64981) Remove the rear cover. (page 3-2)Reference[Removing the Rear Cover]3.3.5.2 Removing the Drive Unit 0017-65021) Remove the harness form the harness guide [3].- 1 screw [1]- 4 connectors [2]F-3-232) Remove the delivery reversal motor unit [2].- 2 screws [1][2][3][1][2][1] [2][1][2][2][2][3][1][1][2][3][1][1][2][3][2][3][1][2]
