Chapter 33-13.1 Removing from the Host Machine3.1.1 Feeder3.1.1.1 DADF-M1 0017-63981) Turn off the control panel power switch [1].2) Turn off the main power switch [2].3) Disconnect the power cable (for the wall outlet) [3].F-3-14) Disconnect the machine's communications cable [1] from its host ma-chine.F-3-25) Bend up the edge of the rubber cover [1], and remove the 2 screws [2];then, detach the angle guide plate [3].F-3-36) Slide the machine toward the rear and lift it to detach.- 3 rollet screws [1]F-3-43.2 External Covers3.2.1 Front Cover3.2.1.1 Removing the Front Cover 0017-64011) Remove the front cover [2] by moving it in the direction of the arrow.- 3 screws [1][1] OFFOFF[2][3] Disconnect.[1][2][1][3][1]
