Canon DADF-M1 Service Manual

Also see for DADF-M1: Service manual General Timing Chart/General Circuit Diagram Portable manual Service manual Service bulletin

Contents

Canon DADF-M1 Service Manual Manual pdf 27 page image

Chapter 22-5MEMOThe machine executes idle rotation for a mix of sheets of the same configuration only if it identifies the paper in the tray at the beginning of the copy job as beingLGL.A sheet of paper is identified as follows in terms of size:small-size: B6, A5, A4, B5, LTR, STMTlarge-size: A4R, B5R, A3, B4, LTRR, LGL, 279.4X431.8 mm (11x17)1. Normal rotationpickup/deliverypicks up an original, and delivers it after it hasbeen read.single-sided original -> single-sidedprintsingle-sided original -> double-sidedprintextra-length original>single-sided print2. Normalrotation pickup/reversaldeliverypicks up an original, and reverses anddelivers it after it has been read.double-sided original -> double-sidedprintdouble-sided original -> single-sidedprint3. Idle feed/reversalpickup/reversal deliveryexecutes idle feed to find out the size of theoriginal; then, executes idle feed so that thereading may start with the face of theoriginal; then, picks up, reverses, and deliversit after it has been read.double-sided original of differentconfigurations -> double-sided printdouble-sided original of differentconfigurations -> single-sided printdouble-sided original of sameconfiguration -> double-sided print(inch-configuration only)double-sided original of sameconfiguration -> single-sided prints(inch-configuration only)4. Idle feed/reversalpickup/deliveryexecutes idle feed to identify the size of theoriginals, reverses it, and delivers it after ithas been read.single-sided original of differentconfigurations -> single-sided printsingle-sided-original of differentconfigurations -> double-sided printsingle-sided original of sameconfiguration -> double-sided print(inch-configuration only)single-sided original of sameconfiguration -> single-sided print (inch-configuration only)