2. Change the value as gap A in the figure.• If the printed image is longer: Increase the value. (The image shrinks in the feed direction.)• If the printed image is shorter: Decrease the value. (The image extends in the feed direction.)Setting Value; 1=0.1%Feed directionATrailing edge oftest chart< If the image is shorter >Trailing edge ofprinted imageFeed directionATrailing edge ofprinted imageTrailing edge oftest chart< If the image is longer >3. When the setting value was changed in step 2, write down the new numerical value in the service label.NOTE:The service label affixed to the inside of Reader Front Cover.Adjusting the Image Position (Main Scanning Direction)1. Copy the test chart with the DADF.2. Compare the horizontal registration between the copy and the test chart. As necessary, make the followingadjustment.■ Adjustment Procedure1. Select the following item in the service mode.COPIER > ADJUST > ADJ-XY > ADJ-Y-DF5. Adjustment80
