7. Close the DADF, and then open it again.8. Press the White Plate upward as shown in the figurebelow.CAUTION:If the White Plate is pressed downward, it is placed onthe Index Sheet, so be sure to press it upward.9. With the DADF closed, check that the White Plate isnot placed on the Index Sheet as shown in thefigures.CAUTION:Be sure that there is no gap between the White Plateand the Index Sheet. As a guide, it should be 0.3 mmor less.'$')'$')'$') '$')White Plate Index SheetReader UnitWhite Plate Index SheetReader UnitWhite Plate Index SheetReader UnitWhite Plate Index SheetReader UnitAdjusting the ReadingPosition1. Execute the following item in the service mode.COPIER > FUNCTION > INSTALL > STRD-POS2. Press [OK] or [Yes].The scanner to start a scan; in several seconds, theDADF will end auto adjustment of the read position.6. Installation102
