MULTIFUNCTION GAUGErmo2010-001-015_ben1. Category icons2. Default riding icon selectedWhen the selection is on the last icon,it will then move to the first icon whenthe MODE button will be pressed.In some screens, vertical or horizontalarrows are visible. This indicates thatyou have to use the LEFT/RIGHT but-ton to change the setting enclosed bythe horizontal arrows and to use theUP/DOWN button to change the set-ting enclosed by the vertical arrows.When a double arrow is visible, it indi-cates the following depending on thedisplayed screen:– Holding the DOWN button whenthe volume bar is displayed willmute the audio system. From themute condition, pressing the UPbutton will reset the audio volumeto its last setting.– Holding the related arrow button willscroll the values to the end or to thebeginning.– Using the related arrow button willscroll the list to reveal the remainingitems.12rmo2015-001-106_aenTYPICAL1. Use the UP/DOWN button to select thevertical arrows2. Use the LEFT/RIGHT button to select thehorizontal arrowsWhen an item is selected, this sets theitem to the current value.After acknowledging the initial safetymessage at gauge startup, or aftera few seconds elapsed in any otherscreen without pressing any RECCbutton, the display will automaticallyreturn to the default riding screen.Category Icon ScreenDescriptionDefault Riding Screenrmo2010-001-401_aenDEFAULT RIDING SCREEN1. Engine coolant temperature (optionpackage)2. Fuel level (option package)3. Digital speedometer4. Engine speed (not factory set)5. Radio preset or radio frequency (not factoryset)32 ______________
