218 DRIVING AND OPERATINGJ : Press to turn the system on oroff. A white cruise control indicatorcomes on.+RES : Press the control up briefly toresume the previous set speed or toincrease vehicle speed if ACC isalready activated. To increase speedby 1 km/h (1 mph), press +RES up tothe first detent. To increase speed tothe next 5 km/h (5 mph) mark on thespeedometer, press +RES up to thesecond detent.SET− : Press the control down brieflyto set the speed and activate ACC orto decrease vehicle speed if ACC isalready activated. To decrease speedby 1 km/h (1 mph), pressSET− downto the first detent. To decrease speedto the next 5 km/h (5 mph) mark onthe speedometer, press SET− down tothe second detent.* : Press to disengage ACC withouterasing the set speed from memory.[ : Press to select a following gaptime (or distance) setting for ACC ofFar, Medium, or Near.Setting Adaptive Cruise ControlIf the cruise control is on when not inuse, the cruise on/off control could getpressed and cruise control couldbecome active when not desired. Keepcruise control button off when cruiseis not being used.Select the set speed desired for cruise.This is the vehicle speed when novehicle is detected in its path.ACC will not set at a speed less than25 km/h (16 mph), although it can beresumed when driving at lowerspeeds.To set ACC:1. Press J.2. Get up to the desired speed.3. Press and release the SET–control.4. Remove foot from theaccelerator.After ACC is set, it may immediatelyapply the brakes if a vehicle ahead isdetected closer than the selectedfollowing gap.The ACC indicator displays in theinstrument cluster and Head-UpDisplay (HUD) (if equipped). When theACC is active, the indicator turnsgreen.Be mindful of speed limits,surrounding traffic speeds, andweather conditions when selecting theset speed.
