LIGHTING 155. Your vehicle's windscreen is dirty,cracked, or obstructed bysomething that blocks the view ofthe light sensor.. Your vehicle's windscreen iscovered with ice, dirt, haze,or other obstructions.. Your vehicle is loaded such thatthe front end points upward,causing the light sensor to aimhigh and not detect headlampsand tail lamps.. You are driving on winding or hillyroads.You may need to manually disable orcancel the main beam headlamps byturning the dipped beam headlampson, if any of the above conditionsexist.Exterior Lamps OffReminderA warning chime will sound if theexterior lamp control is left on ineither the headlight or parking lightposition and the driver door is openedwith the ignition off.Headlamp Main/Dipped-Beam Changer2 3 : Push the indicator lever awayfrom you and release, to turn themain beams on. To return to dippedbeams, push the stalk again or pull ittoward you and release.This indicator light turns on in theinstrument cluster when thehigh-beam headlamps are on.Flash-to-PassThis feature allows the main-beamheadlights to be used to signal thedriver in front of you that you wantto pass.Pull and hold the indicator levertoward you to use this feature. Whenthis is done the following will occur:. If the headlights are off or indipped-beam mode, themain-beam headlights will turnon. They will stay on as long asthe lever is held there. Release thelever to turn them off.. If the headlamps are inmain-beam mode, they will go todipped beam.Daytime RunningLamps (DRL)DRL can make it easier for others tosee the front of your vehicle duringthe day.The dedicated DRL will come on whenall of the following conditions are met:. The ignition is on.. The exterior lamp control isin AUTO.. The light sensor determines it isdaytime.. The parking brake is released orthe vehicle is not in P (Park).The tail lamps, instrument panellights, and other lamps will not be on.
