NO CHANGE: No change will be made to this feature.The current setting will remain.To select a setting, press the set/reset button while thedesired setting is displayed on the DIC.DELAY DOOR LOCKThis feature allows you to select whether or not thelocking of the vehicle’s doors and tailgate will be delayed.When locking the doors and tailgate with the power doorlock switch and a door or the tailgate is open, this featurewill delay locking the doors and tailgate until five secondsafter the last door is closed. You will hear three chimes tosignal that the delayed locking feature is in use. The keymust be out of the ignition for this feature to work. Youcan temporarily override delayed locking by pressing thepower door lock switch twice or the lock button on theRKE transmitter twice. See Delayed Locking onpage 2-11 for more information.Press the customization button until DELAY DOORLOCK appears on the DIC display. Press the set/resetbutton once to access the settings for this feature.Then press the customization button to scroll throughthe following settings:OFF: There will be no delayed locking of thevehicle’s doors.ON (default): The doors will not lock until five secondsafter the last door or the tailgate is closed.NO CHANGE: No change will be made to this feature.The current setting will remain.To select a setting, press the set/reset button while thedesired setting is displayed on the DIC.EXIT LIGHTINGThis feature allows you to select the amount of time youwant the exterior lamps to remain on when it is darkenough outside. This happens after the key is turnedfrom ON/RUN to LOCK/OFF.Press the customization button until EXIT LIGHTINGappears on the DIC display. Press the set/reset buttononce to access the settings for this feature. Thenpress the customization button to scroll through thefollowing settings:OFF: The exterior lamps will not turn on.30 SECONDS (default): The exterior lamps will stayon for 30 seconds.1 MINUTE: The exterior lamps will stay on forone minute.2 MINUTES: The exterior lamps will stay on fortwo minutes.NO CHANGE: No change will be made to this feature.The current setting will remain.To select a setting, press the set/reset button whilethe desired setting is displayed on the DIC.3-61
