If you use the remote keyless entry transmitter to enteryour vehicle and the remote recall memory featureis on, automatic seat, mirror, and adjustable pedalmovement will occur. See “MEMORY SEAT RECALL”under DIC Vehicle Customization on page 3-57 formore information.To stop recall movement of the memory feature atany time, press one of the power seat controls,memory buttons, power mirror buttons, or adjustablepedal switch.If something has blocked the driver’s seat and/or theadjustable pedals while recalling a memory position,the driver’s seat and/or the adjustable pedals recallmay stop working. If this happens, remove theobstruction and press the appropriate function controlfor two seconds. Then try recalling the memoryposition again by pressing the appropriate memorybutton. If the memory position is still not recalling,see your dealer for service.Easy Exit SeatThe control for this feature is located on the driver’sdoor between buttons 1 and 2.With the vehicle in PARK (P), the exit position canbe recalled by pressing the exit button. You will heara single beep. The driver’s seat will move back.If the easy exit seat feature is on in the DriverInformation Center (DIC), automatic seat movementwill occur when the key is removed from the ignition.See “EASY EXIT SEAT” under DIC VehicleCustomization on page 3-57 for more information.Further programming for the memory seat featurecan be done using the DIC. You can select theautomatic easy exit seat feature or the remotememory seat recall feature.For programming information, see DIC VehicleCustomization on page 3-57.1-7
