Manual OperationYou may manually adjust the air delivery mode orfan speed.y9z(Fan): The switch with the fan symbol allowsyou to manually adjust the fan speed. Press the uparrow to increase fan speed and the down arrowto decrease fan speed.Pressing this button when the system is off will turnthe system on.Pressing either arrow while using automatic operationwill place the fan in manual operation. The fansetting will display and the AUTO light will turn off.The air delivery will remain in automatic operation.N(Mode): Press this button to manually changethe direction of the airflow in your vehicle. Repeatedlypress the button until the desired mode appears onthe display.When the system is turned off, the display will go blankafter displaying the current status of the system.H(Vent): This setting will deliver air to the instrumentpanel outlets.)(Bi-Level): This mode allows for split air to theinstrument panel outlets and to the floor outlets. Theflow can be divided between vent and floor outletsdepending upon where the knob is placed between thesettings. A little air is directed towards the windshieldand side window vents. Cooler air is directed tothe upper vents and warmer air to the floor vents.6(Floor): This mode directs most of the air to thefloor outlets, with some of the air directed to thewindshield, side window outlets, and second row flooroutlets. In this mode, the system will automaticallyselect Outside Air.-(Defog): See “Defogging and Defrosting” later inthis section.@(Recirculation): Press this button to turn therecirculation mode on. When the button is pressed,an indicator light will come on.This mode keeps outside air from entering the vehicle.It can be used to reduce outside air and odors fromentering your vehicle. Recirculation may also helpcool the air inside your vehicle more quickly once thetemperature inside the vehicle is less than the outsidetemperature. The recirculation mode cannot be usedwith floor, defrost, or defogging modes.3-26
