3-61container Commandscontainer moveTo renumber an array, use the container move command. Ifanother array already has the new number, the command returnsan error.NotesA controller currently supports 24 visible arrays. A visible array isan array that is visible to the operating system and users. Visiblearrays are identified with container IDs 0 through 23.Container IDs 24 through 63 are reserved for hidden arrays. Ahidden array is an array that is not visible to the operating systemand can only be used by other arrays. (The container listcommand, however, displays hidden arrays.)The container move command does not prevent you fromassigning a hidden container ID (24 through 63) to a visible array. Ifyou assign a visible array with a hidden container ID (24 through63), the operating system no longer sees the visible array. Ingeneral, when renumbering a visible array, use container IDs 0through 23. When renumbering a hidden array, use container IDs24 through 63.Syntaxcontainer move {container} {container}Parameters{container}Specifies the ID number (0 to 63) of the array to renumber.{container}Specifies the ID number (0 to 63) to assign to the arrayspecified in the first container parameter.
