Configuring the PC Software PC Offline Configuration18117. Configuring the PC SoftwareFurther possibilities of use can be implemented on a workstation computer withthe Windows operating system by installing drivers and programmes. You can findthe installation programmes required for this on the product CD that comes withthe OpenCom 510.Proceed as follows to install extra software:1. Log on under Windows NT or Windows 2000/XP as the administrator.2. Insert the product CD.If your PC is suitably configured, the CD will start automatically. Otherwiseselect Run from the Start menu. Click on the Browse button to look for theprogram “cd_start.exe” on the CD. Confirm this with Open and OK.3. Select the required option from the start interface. Follow the program instruc-tions.Further instructions for various options that are available are given below.17.1 PC Offline ConfigurationThe offline configurator is a reduced system software that is executable under theoperating systems Microsoft Windows 2000 or Microsoft Windows XP. With theoffline configurator it is possible to create system configurations for various TC-system types – without a connection to the live system. You configure a virtualsystem and later, aided by the data backup, transfer the configuration to therunning system.Installing the offline configurator1. Display the product CD contents in Windows Explorer. Search the “\OFC\”installation directory for the offline configurator.2. Start the StartCenter installation program by double-clicking on “Setup.exe”.Following the installation assistant’s instructions. Select the appropriate instal-lation directory or apply the default.
