Configuration Configuring the OpenCom 510858.2 Configuring the OpenCom 5108.2.1 Preparing the ConfigurationBefore starting with the configuration, make sure you have the following docu-ments at hand:■ An overview of the ports■ A list of the terminals to be connected■ A list of the IPEIs, if you wish to log on DECT terminals in the secure procedure■ A list of the users to be set up (staff entitled to use the services of theOpenCom 510) with their names, departments, and the internal call numbersyou want to allocate to them■ For Internet access: the Internet service provider access data.Data not available for initial configuration can be updated or corrected at a laterdate.Note: Use the Configuration Guide starting on page 192. Thiswill assist you in making the settings in the correct sequence.8.2.2 Starting the Web Console1. Start your Web browser. Enter the OpenCom 510 IP address in the “Address”box: http://192.168.99.254/.If the configuration PC gets its IP address automatically from the OpenCom 510or if the OpenCom 510 is entered as the domain name server, you can also startthe Web console by entering the DNS name. The DNS name in the factorysetting is host.domain. You can change this in the Configurator (NET Config-uration: LAN menu).2. The OpenCom 510 Web console is started. First set the country in which youare operating the OpenCom 510, and in which language the Web console is tobe displayed.
