Configuring the PC Software PC Offline Configuration1823. On the product CD, in the offline configurator installation directory, you willfind ZIP archives for various TC-system types. Copy the desired ZIP archives tothe installation directory.4. End the installation with a function test. With a double-click on the newlycreated desktop icon, start the StartCenter program. Select from the fold-down selection the desired TC-system type. Available offline configurators arenow displayed as symbols. Double-click on a configurator symbol and selectfrom the dialogue Start with Factory settings. The offline configurator startswith an command window. Open a Web browser and in the address line enter:“http://localhost/”. Confirm with enter.5. Configure the virtual system as usual. Using the data backup, you can save theconfiguration.6. Activate the command window. End the offline configurator with the window’smenu command Close.To maintain multiple different installations, you can copy further offline configu-rators to new directories of your hard-drive. Change between the directories byselecting the command Extras: Setup in the StartCenter program. Select the cor-responding Working Directory in the Setup dialogue. You will find further expla-nations in the StartCenter online help.Notes■ The ITC-system serial number to which the configuration is later to be trans-ferred is queried when starting the offline configurator. You will recognise thisby the caution symbol in the left symbol-bar. Click on this symbol. Enter theserial number into the input field that opens.The serial number is required to activate program packages requiring licencesin the offline configurator (in menu SYS Configuration: licences). The serialnumber can be obtained for the ITC-system’s Configurator in the System Info:Versions menu.■ If there is a firewall installed on the workstation computer, then a warning willbe displayed. This warning shows that the computer is now ready-to-receiverrequests for the offline configurator’s web-server service. You must permit theweb-server service, for example by activating the option For this program donot display this notification again.
