Modules MS+UPN2-8817.8 MS+UPN2-8Field of ApplicationThe MS+UPN2-8 interface card provides eight U pn interfaces for connectingsystem terminals and DECT base stations.The MS+UPN2-8 interface card can be installed in any of the slots (1 to 12) of theOpenCom 510 (see Slots starting on page 27).Technical Information■ The MS+UPN2-8 interface card can also be installed in a slave system.■ A maximum of 48 RFPs (Radio Fixed Parts, DECT base stations) can be con-nected to the entire system.■ In order to connect RFPs, U pn ports 1+2, 3+4, 5+6 or 7+8 can be combined bysetting the DIP switches on the card accordingly.For further information, refer to Upn Ports starting on page 44.■ The MS+UPN2-8 interface card runs on software acquired from the system.After the card has been installed it will automatically load the requiredsoftware.Pin AssignmentFor information on the U pn interface pin assignment, refer to Upn Ports starting onpage 44.IndicatorsThere are four LEDs on the front of the MS+UPN2-8 interface card.
