A&D GX-203A Instruction Manual

Also see for GF-10001A: Communications manual Maintenance manual

Contents

A&D GX-203A Instruction Manual Manual pdf 52 page image

50Store the time10-4 Clock And Calendar FunctionThe balance is equipped with a clock and calendar function.When the Clock and Calender function（dout、5-td）is set, the time anddate are added to the output data.Set or confirm the time and date as follows:OperationStep1 Press and hold the SAMPLE key until ba5fnc of the functiontable is displayed in the weighing mode, then release the key.Step2 Press the SAMPLE key several times to display Cl adj .Step3 Press the PRINT key.The balance enters the mode to confirm or set the time and date.Confirming the timeStep4 The current time is displayed with all the digits blinking.□ When the time is not correct and is to be changed, press the RE-ZERO keyand go to step 5.□ When the time is correct and the date is to be confirmed, press the SAMPLEkey and go to step 6.□ When the time is correct and the date does not need to be confirmed, press theCAL key and go to step 8.Setting the timeStep5 Set the time in 24-hour format using the following keys.RE-ZERO (＋)key .... To increase the value by one.MODE (－)key ......... To decrease the value by one.SAMPLE key .......... To select the digits to change the value.The selected digits blink.PRINT key............... To store the new setting, display end and go tostep 6.CAL key .................. To cancel the new setting and go to step 6Confirming the dateStep6 The current date is displayed with all the digits blinking.□ To change the display order of year (y), month (m) and day (d), pressthe MODE key. The date is output in the order as specified.□ When the date is not correct and is to be changed, press the RE-ZEROkey and go to step 7.□ When the date is correct and the operation is to be finished, press the CALkey and go to step 8.□ When the time is to be confirmed again, press the SAMPLE key and goback to step 4.Confirm the dateSet the timeSet the dateStore the dateSet the timePress and holdPress several times