A&D GX-203A Instruction Manual

Also see for GF-10001A: Communications manual Maintenance manual

Contents

A&D GX-203A Instruction Manual Manual pdf 90 page image

8820.Password Lock FunctionThe password function can be specified for an authorized user by using a password stored in thebalance by manager. While the password function is used, the balance can not be weighed withoutinputting the correct password.There are two login levels : administrator ( ) and user ( ~ ).User can individually set the password for 10 people. Administrators can use all functions and settings.User can only perform weighing.Users cannot change function settings including initialization and clock setting.Login level Weighing Selectfunction andinitializationFunctionsetting(Date/time)Weighing valueDisplay・Output Re-zero Calibration Changethe unitChangethe minimumdisplayAdministrator（AdMin.) Possible Possible Possible Possible Possible Possible PossibleOperator（oPR.1～10） Possible Possible Impossible Impossible Impossible Impossible ImpossiblePassword: Four digits (4 x 4 x 4 x 4 = 256 outcomes) using MODE , SAMPLE , PRINT andRE-ZERO keys.At factory setting, the password function is not used.The management of the password function is performed in "Password function" of the Function table.20-1 Using Password FunctionThe password function can be switched between "Use" or "Not used" at"Password function ( )" of the Function Table1. Press and hold the SAMPLE key in the weighing mode.ba5fnc is displayed.2. Press the SAMPLE key several times untilis displayed.3. Press the PRINT key to display .To cancel the operation, press the CAL key.4. Press the RE-ZERO key to display .5. Press the PRINT key to display 5ure :ye5 " "where "No" is selected.(where "No" is blinking when "No" is selected.)6. Press the RE-ZERO to change ye5 / .7. Display the 5ure :"y"e"5 .(where "Yes" is blinking when "Yes" is selected.)8. Press the PRINT key when "Yes" is selected, thepassword function can now be used.When turning on the balance, input the new password.9. is displayed. To register or change the password,proceed the next page "2". If it is not to register, press theCAL key twice to return to the weighing display.x2Press and holdPress several timesSelect NoSelect YesChange Yes/No