51Setting the dateStep7 Set the date using the following keys.RE-ZERO (＋)key .... To increase the value by one.MODE (－)key ........... To decrease the value by one.SAMPLE key .......... To select the digits to change the value.The selected digits blink.PRINT key .............. To store the new setting, display end and go tostep 8.CAL key .................. To cancel the new setting and go to step 8.Quitting the operationStep8 The balance displays the next menu（Cp fnc）of the function table.Press the CAL key to exit the clock and calendar function and returnto the weighing mode.Note Do not enter invalid values such as a non-existing date whensetting the time and date.When the clock backup battery has been depleted, the balancedisplays rtc pf . Under this condition, press any key and setthe time and date. The dead battery only affects the clock andcalendar function. Even so, the function works normally as longas the AC adapter is connected to the balance.
