256. Impact Detection FunctionThe GX-A / GF-A series has a function to detect impact to the mass sensor section and to display theimpact level.By lowering the impact level at the time of loading, it is possible not only to alleviate variation in theweighing value but also to reduce the risk of failure of the mass sensor section.Especially when incorporating the balance in a production line, etc. and weighing by means such as anautomated system, impact to the sensor may be applied greater than expected.When designing automatic systems and the like, it is recommended that you minimize the impact levelas much as possible while checking the shock indicator.Impact level display is from level 0 to level 4, 5level.Impact level Shock indicator Buzzer Contents0No NoSafe1NoCaution2No Caution：Consider impact mitigation3 OnebeepWarning：Do not apply greater impact4 TwobeepDanger：Sensor may be damagedNote□ Impact on the weighing sensor may be applied to the weighing pan at time of loading, or it may beapplied from the table on which the balance is installed.The impact detection function also works for impact applied from the table.SHOCKSHOCKSHOCKSHOCK
