267. Response Adjustment / Self Check FunctionThis function stabilizes the weight value, reducing the influence on weighing that is caused by drafts and/orvibration at the place where the balance is installed. This function adjusts by automatically analyzing theenvironment or by hand-operation. The function has three stages as follows : Changing the weighing speedchanges the display refresh rate.Display FunctionsettingResponse characteristicFAST Cond 0 Fast response, Sensitive valueSlow response, Stable valueMID. Cond 1SLOW Cond 27-1 Response AdjustmentResponse adjustment can be changed by the following method.1. Press and hold the MODE key until RESPONSE is displayed, andthen release the key.2. Press the MODE key to select a weighing speed.Either FAST , MID or SLOW can be selected.3. After a few seconds of inactivity the balance displays end . Then, itreturns to the weighing mode and displays the updated responseindicator.The response indicator remains displayed for a while.NoteThe value set for response adjustment can be changed by"Condition Cond " of "Environment display" in the FunctionTable.For the setting method, refer to "10.Function Table".ResponseindicatorPress and HoldRelease andpress againEach pressing switchesthe indicatorsAfter a while
