ADT ADT-UDACT Product Information

Also see for ADT-UDACT: Manual

Contents

Table Of Contents
Table Of Contents
NFPA Standards, NFPA 72 National Fire Alarm Code
Product Description
Figure 1-1: ADT-UDACT Assembly
Controls and Indicators
Circuits
Specifications
Modes and Special Functions
Clear Function
Installation and Wiring
Figure 2-2: Relay Driver Connections
Figure 2-3: Monitoring for ADT-UDACT Trouble
Figure 2-4: Typical Wiring Diagram for UL Power-limited Requirements
Programming Instructions
Switch Functions
Table 3-1: Start and End Monitoring Addresses
Table 3-2: Event Codes, Primary Number
Table 3-3: Event Codes, Primary Number
Table 3-4: Ademco Contact ID, Primary Number
Table 3-5: Event Codes, Secondary Number
Table 3-6: Event Codes, Secondary Number
Table 3-7: Ademco Contact ID, Secondary Number
Operating Instructions
Displays
Figure 4-1: ADT-UDACT Phone Connectors and LEDs
Key Report Descriptions
Disabling of Zones or Points
Zone or Point Supervisory
Figure 4-2: Handset/Speaker Connection
Reporting Formats
Table 5-2: Letter Code Definitions
Table 5-3: Ademco Contact ID Reporting Structure
Compatible Receivers
Programming Reference Sheets
Appendix B: Point Assignments (Unimode 300*/400)
Appendix C: Point Assignments (ADT-MNNA)
Appendix D: Unimode 2020/1010
Figure D-3: EIA-485 Connection to Panel Mounted ADT-UDACT
Figure D-4: EIA-485 Connection to Remote ADT-UDACT
Appendix E: Unimode 300/400
Figure E-3: Unimode 400 External ADT-UDACT Mounting in ADT-ABS8RF
Appendix F: ADT-MNNA
Appendix G: Annunciators

ADT ADT-UDACT Product Information Manual pdf 17 page image

Document 50934 Rev B 5/15/00 PN 50934:B 17Power-limited and nonpower-limited circuit wiring must remain separated in thecabinet. All power-limited circuit wiring must remain at least 0.25" away from anynonpower-limited circuit wiring. Furthermore, all power-limited circuit wiring andnonpower-limited circuit wiring must enter and exit the cabinet through differentknockouts and/or conduits. A typical wiring diagram for the ADT-UDACT is shownbelow.2.3 UL Power-limited WiringRequirementsFigure 2-4: Typical Wiring Diagram for UL Power-limited RequirementsPower-limited circuitsUse power-limited sourceDO NOT USEUDACPWRL.WMF

/ 68

This manual is suitable for:

ADT-UDACT

ADT ADT-UDACT Product Information

Product

Learn More

Legal