Document 50934 Rev B 5/15/00 PN 50934:B14Figure 2-1: Wiring Phone JacksNote: Shorting barsinside RJ31X Jackremoved during maleplug insertion7 footCable(MCBL-7)Order SeparatelyGreen WireGreen WireRed WireRed WireTo premise phones To premise phonesTipRingRingTipPrimaryPhone LinePH-1SecondaryPhone LinePH-2Modular FemaleConnectorsMale PlugConnectorsTipRingRingTip(PrimaryLines)IncomingTelco PhoneLines(Secondary Lines)Incoming TelcoPhone LinesMounting OptionsFor information on mounting the ADT-UDACT in a specific fire alarm control panel,refer to the appropriate Appendix.Telephone CircuitsProvision to connect to two independent telephone lines is available via twotelephone jacks labeled PH1 (Primary) and PH2 (Secondary). Telephone line control/command is possible via double line seizure as well as usage of an RJ31X styleinterconnection. (RJ31X jacks must be ordered separately).Note: It is critical that the ADT-UDACT be located as the first device on theincoming telephone circuit to properly function.2.2 Output Circuits2.1 General2.0 Installation and WiringUDACJAKN.WMF
