ADEMCO VISTA-250BP Installation And Setup Manual

Also see for Vista-128BP: Programming guide

Contents

ADEMCO VISTA-250BP Installation And Setup Manual Manual pdf 90 page image

VISTA-128BP/VISTA-250BP Installation and Setup Guide6-12Limitation of Access Schedule WorksheetEnter the appropriate time window numbers for each access schedule.Acc Mon Tues Wed Thurs Fri Sat Sun HolSch W1 W2 W1 W2 W1 W2 W1 W2 W1 W2 W1 W2 W1 W2 W1 W2123…8NOTE: The holidays used for the access groups are the same as those defined in the holiday schedule.Limitation of Access Schedules ProgrammingTo program access schedules enter Scheduling Menu Mode Installer Code + # 80. After entering Scheduling MenuMode, press [0] until the “Access Sched. ?” prompt appears.PROMPT EXPLANATIONAccess Sched. ?1 = YES 0 = NO 0Enter 1 to program access schedules.ACCESS SCHED # ?01-08, 00 = Quit 01Enter the access control schedule number between 01 and 08.Press [✳] to accept entry.Enter 00 at the “Access Sched #?” prompt to quit the access control menus and display the Quit ? prompt.MON A1 Window 1?00:00 00:00 00Enter the first time-window number (01-20) for this access schedule for the displayed day. As the number iskeyed in, the actual time that has been stored for the window is displayed.Press [✳] to continue.MON A1 Window 2 ?00:00 00:00 00Enter the second time-window number from 01-20 for this access schedule for the displayed day. As thenumber is keyed in, the actual time that has been stored for the window is displayed.Press [✳] to continue.TUE A1 Window 1?00:00 00:00 00Repeat the procedure for the other days of the week. When the last day of the week has beenprogrammed, the windows for holidays may be entered.Hol A1 Window 1 ?00:00 00:00 00Enter the first time-window number for holidays for this access schedule. As the number is keyed in, theactual time that has been stored for the window is displayed.Press [✳] to continue.Hol A1 Window 2 ?00:00 00:00 00Enter the second time-window number for holidays for this access schedule. As the number is keyed in, theactual time that has been stored for the window is displayed.Press [✳] to continue.Quit ?1 = YES 0 = NO 0Enter 0 at the “Quit ?” prompt to return to the main menu choices and continue programming.Enter 1 to quit Scheduling Menu Mode.Temporary SchedulesEach partition can be assigned a temporary schedule,which overrides the regular open/close schedule (andthe holiday schedule). This schedule takes effect assoon as it is programmed, and remains active for up toone week.Only users with the authority level of manager orhigher can program temporary schedules.A temporary schedule affects only the partition fromwhich it is entered. Temporary schedules can also bereused at later dates simply by scrolling (pressing [#])to the “DAYS?” prompt and activating the appropriatedays. This should be considered when defining dailytime windows.