ADEMCO VISTA-128FBP User Manual

Also see for VISTA-128FBP: User guide Programming guide

Contents

ADEMCO VISTA-128FBP User Manual Manual pdf 48 page image

– 48 –Speed Key (Macros) (cont’d)ExecutingTo execute a Speed Key sequence, do the following:If a lettered key, A-B-C, has been assigned as a Speed Key, press and holddown the appropriate key (about 2 seconds). If a user code is required for anypart of the Speed Key sequence, the following prompt appears. Otherwise,the Speed Key sequence automatically begins.ENTER USER CODE✴✴✴✴Enter your user code. The defined Speed Key sequence will beginautomatically.To activate a Speed Key not assigned to the A-B-C keys, press and hold downthe [D] key for 2 seconds until the following prompt appears:ENTER SPEED KEY #01-32 00=QUITEnter the desired Speed Key number.If a user code is required for any part of the Speed Key sequence, thefollowing prompt appears. Otherwise, the Speed Key sequence automaticallybegins.ENTER USER CODE✴✴✴✴Enter your user code. The programmed Speed Key sequence will beginautomatically.Using Speed Key For Fire Alarm FunctionInstead of a macro sequence, the Speed Keys can be programmed for thefollowing fire alarm functions:• Fire Sounder Silence - The key, when pressed, silences fire alarms.• Display Next Fire Alarm - The key, when pressed, causes the keypad todisplay the next fire alarm in the system.• Display Previous Fire Alarm - The key, when pressed, causes the keypadto display the previous fire alarm in the system.NOTE: Each of these functions requires programming by theinstaller. If you want to use a Speed Key for one of these functions,ask your installer to program the system accordingly.