– 14 –Entry/Exit DelaysGeneral InformationYour system has installer-programmed time delays, known as exit delay andentry delay. Whenever you arm your system, exit delay gives you time toleave through the designated exit door without setting off an alarm. Exitdelay begins immediately after entering any arming command, and applies toall modes of arming protection. If programmed, a slow beeping will soundthroughout the exit delay period.Entry Delay gives you time to disarm the system when you reenter throughthe designated entrance door. But the system must be disarmed before theentry delay period ends, or an alarm will occur. The keypad will beep duringthe entry delay period, reminding you to disarm the system. You can alsoarm the system with no entry delay at all by using either INSTANT orMAXIMUM arming modes. These modes provide greater security while onthe premises or while away for extended periods of time. See your installerfor your delay times.
