ADEMCO VISTA-128FBP User Manual

Also see for VISTA-128FBP: User guide Programming guide

Contents

ADEMCO VISTA-128FBP User Manual Manual pdf 36 page image

– 36 –Arming Perimeter Only(With Entry Delay ON)Using the 3 STAY keyUse this key when you are staying home, but might expect someone to usethe entrance door later.When armed in STAY mode, the system will sound an alarm if a protecteddoor or window is opened, but you may otherwise move freely throughout thepremises. Late arrivals can enter through the entrance door without causingan alarm, but they must disarm the system within the entry delay period oran alarm will occur.The system provides three STAY modes. STAY mode 1, 2, and 3. STAYmodes 1 and 2, when activated, automatically bypass specific zones assignedby the your installer to each of the STAY modes. STAY mode 3, whenactivated, automatically bypasses all zones assigned to STAY modes 1 AND2. Check with your installer for a list of the zones that are bypassed duringeach STAY mode.Close all perimeter windows and doors before arming (seeCHECKING FOR OPEN ZONES section)STAY1. Enter your security code and press 3 + 1 for STAY Mode 1.Enter your security code and press 3 + 2 for STAY Mode 2.Enter your security code and press 3 + 3 for STAY Mode 3.NOTE: If none of the zones in a partition are assigned to Stay mode 2, thenwhen the user enters [User Code] + [3] (STAY), all zones assigned to Staymode 1 are automatically bypassed.2. ARMED ***STAY 1*ZONE BYPASSEDThe keypad beeps three times, displays thearmed message, and indicates which STAYmode (1, 2 or 3).Note: "ZONE BYPASSED" in this displaysimply indicates that some zones of protectionare not armed when using STAY mode.