Menu
ADEMCO LYNX User Manual
Also see for LYNX: Installation instructionsUser guideUser guideQuick start guideSystem manual
                                        | |
Contents
| 
– 12 –6(&85,1*7+(35(0,6(6Arming the SystemArming the System With No DelayUse NO DELAY with STAY mode when you are staying home and do not expect anyoneto use the entrance door.Use NO DELAY with AWAY mode when the premises will be vacant for extendedperiods of time such as vacations, etc.When armed with NO DELAY, the system will sound an alarm if a protected door orwindow is opened, including the entrance door. You may leave through the entrance doorduring the exit delay period without causing an alarm, but an alarm will sound as soon assomeone reenters.To arm with NO DELAY: + AWAY or STAY + NO DELAYYour security code**** See Quick Arming paragraph.Quick ArmingIf Quick Arm was programmed by the installer, you do not need to enter the security codeto arm the system. Instead, simply press and hold down the desired arming key for atleast 2 seconds. The security code must always be used to disarm the system, however.To arm if Quick Arm is active: AWAY or STAYhold down for at least 2 secondsTo arm with NO DELAY if Quick Arm is active: AWAY or STAY then NO DELAYhold down for at least 2 secondsIMPORTANT: The Babysitter Code and Installer Code cannot disarm the system unlessit was used to arm the system. In addition, if the system is armed by pressing and holdingthe Quick-Arm buttons, neither the Babysitter Code nor Installer Code can disarm thesystem. |
Related manuals for ADEMCO LYNX
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved