2.6 Installing options2.6.1 Installing an expansion containerValidity of this sectionThis section is only valid for other design than Type C.Introduction to the expansion containerThe expansion container is needed on suspended robots (other design than TypeC) to make sure that the amount of oil in gearbox axis 1 covers all important parts.Robots ordered as suspended robots have the expansion container installed ondelivery.Expansion containerxx1000000318CoverAAttachment screw M6x16, quality 8.8-A2F (5 pcs)BOil expansion container with coverCBaseDO-ring D220x5EAttachment screw M5x20, quality 8.8-A2F and washer (2+2 pcs)FO-ring D1=9.5 D2=1.6GOil plug (to be removed)HContinues on next pageProduct manual - IRB 4600 Foundry Prime 893HAC040585-001 Revision: M© Copyright 2013-2018 ABB. All rights reserved.2 Installation and commissioning2.6.1 Installing an expansion container
