1.3.13 Safety risks during work with gearbox lubricants (oil or grease)DescriptionWhen handling gearbox lubricants, there is a risk of both personal injury andproduct damage occurring. The following safety information must be regardedbefore performing any work with lubricants in the gearboxes.NoteWhen handling oil, grease, or other chemical substances the safety informationof the manufacturer must be observed.NoteWhen aggressive media is handled, an appropriate skin protection must beprovided. Gloves and goggles are recommended.NoteAppropriate disposal regulations must be observed.NoteTake special care when handling hot lubricants.Safe handlingElimination/ActionDescriptionWarningMake sure that protective gearlike goggles and gloves are al-ways worn during this activity.Changing and draining gearboxoil or grease may require hand-ling hot lubricant heated up to90 °C.Hot oil or greaseMake sure that protective gearlike goggles and gloves are al-ways worn.When working with gearbox lub-ricant there is a risk of an allergicreaction.Allergic reactionOpen the plug carefully and keepaway from the opening. Do notoverfill the gearbox when filling.When opening the oil or greaseplug, there may be pressurepresent in the gearbox, causinglubricant to spray from theopening.Possible pressurebuild-up in gearboxContinues on next pageProduct manual - IRB 4600 Foundry Prime 373HAC040585-001 Revision: M© Copyright 2013-2018 ABB. All rights reserved.1 Safety1.3.13 Safety risks during work with gearbox lubricants (oil or grease)
