Contents - Table Of Contents
- Table Of Contents
- Table Of Contents
- Overview
- Product documentation, M2004
- How to read the product manual
- Safety
- General Safety Information
- Safety Risks
- Safety risks related to tools/workpieces
- Safety risks related to pneumatic/hydraulic systems
- Safety risks during operational disturbances
- Risks associated with live electric parts
- Safety related Instructions
- DANGER - Moving robots are potentially lethal
- DANGER - First test run may cause injury or damage
- WARNING - The unit is sensitive to ESD
- WARNING - Safety risks during work with gearbox oil
- Installation and Commissioning
- Structure Manipulator
- Unpacking
- Transport
- Pre-installation procedure
- Assemble the robot IRB360
- Working range and type of motion
- On-site installation
- Lifting robot with roundslings
- Amount of required space
- Orienting and securing the robot cage
- Orienting and securing the robot
- Manually releasing the brakes
- Fitting equipment on robot
- Loads
- Installation of Options
- Installation of (optional) customer connections IRB 360
- Installation of Vacuum System (Optional)
- Electrical connections
- Connecting the controller to the manipulator
- Manipulator Cables IRB360
- Maintenance
- Regular Maintenance
- Maintenance schedule and component life
- Inspection activities
- Telescopic Shaft, Wash Down, Axis 4
- Telescopic Shaft, Stainless, Axis 4
- Vacuum System (optional)
- Bar System
- Joint Balls
- Upper Arms
- Hoses
- Spring Units
- Movable plate with swivel
- Replacement/changing activities
- Lubrication activities
- Cleaning activities
- Repair
- General procedures
- Mounting instructions for seals
- Screw joints
- Complete robot
- Replacement of Serial Measurement Board Unit
- Replacement of Parallel Arms
- Replacement of Upper Arm
- Replacement of Bearing Rings
- Replacement of Movable Plate
- Replacement of Telescopic Shaft
- Replacement of Universal Joint
- Replacement of Joint Balls
- Replacement of Gearbox Unit 1- 3
- Replacement of Gearbox Unit 4
- Replacement of motor axis 1-3
- Replacement of motor axis 4
- Replacement of labels
- Replacing of calibration marks
- Vacuum System
- Draining of water separation filter
- Replacement of Ejector Unit
- Cable Harness
- Replacement of Brake Release Button
- Calibration information
- Calibration methods
- Calibration movement directions for all axes
- Calibration scales and correct axis position
- Calibration IRB 360 axis 1-3
- Calibration IRB 360 axis 4
- Fine calibration procedure on FlexPendant
- Updating revolution counters
- Serial Measurement Board memory
- Checking the calibration position
- Decommissioning
- Environmental information
- Reference information
- Introduction
- Applicable safety standards
- Unit conversion
- Weight specifications
- Standard toolkit
- Special tools
- Lifting equipment and lifting instructions
- Oil and Grease specification
- Spare parts and exploded views
- Spare parts, Gear Unit axis 4
- Spare parts, transmission cover
- Spare parts - cable harness
- Spare Parts, SMB Unit
- Spare parts in the base
- Spare Parts, Brake Release Button
- Spare Parts Arm System
- Spare Parts, Telescopic shafts
- Spare parts - Parallell arm system, IRB 360
- Spare Parts, Movable Plate
- Spare Parts, Customer options
- Spare parts - customer options Signal lamp IRB 360
- Circuit diagram
|
Table of Contents4 3HAC030005-001 Revision: -© Copyright 2008 ABB. All rights reserved.3.2 Maintenance schedule and component life . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 753.2.1 Maintenance schedule IRB 360 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 753.3 Inspection activities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 763.3.1 Telescopic Shaft, Axis 4, Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 763.3.2 Telescopic Shaft, Wash Down, Axis 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 783.3.3 Telescopic Shaft, Stainless, Axis 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 803.3.4 Vacuum System (optional). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 823.3.5 Bar System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 843.3.6 Joint Balls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 863.3.7 Upper Arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 873.3.8 Hoses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 893.3.9 Spring Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 913.3.10 Movable plate with swivel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 933.4 Replacement/changing activities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 953.4.1 Changing the Battery in the Measuring System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 953.5 Lubrication activities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 983.5.1 Gearboxes, axes 1- 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 983.6 Cleaning activities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1053.6.1 Cleaning of Robot Standard and Wash Down . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1054 Repair 1094.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1094.2 General procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1104.2.1 Mounting instructions for bearings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1104.2.2 Mounting instructions for seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1124.2.3 Screw joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1144.3 Complete robot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1164.3.1 Replacement of base cover gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1164.3.2 Replacement of Serial Measurement Board Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1184.3.3 Replacement of Parallel Arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1204.3.4 Replacement of Upper Arm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1244.3.5 Replacement of Bearing Rings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1274.3.6 Replacement of Movable Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1304.3.7 Replacement of Telescopic Shaft. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1334.3.8 Replacement of Universal Joint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1364.3.9 Replacement of Joint Balls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1384.3.10 Replacement of Gearbox Unit 1- 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1414.3.11 Replacement of Gearbox Unit 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1444.3.12 Replacement of motor axis 1-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1464.3.13 Replacement of motor axis 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1504.3.14 Replacement of labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1534.3.15 Replacing of calibration marks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1564.4 Vacuum System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1584.4.1 Replacement of Vacuum Hoses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1584.4.2 Draining of water separation filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1604.4.3 Replacement of Ejector Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1624.5 Cable Harness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1654.5.1 Replacement of Cable Harness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1654.5.2 Replacement of Brake Release Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1675 Calibration information 1715.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1715.2 Calibration methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
PreviousNext |