4 Repair4.4.3. Replacement of Ejector Unit3HAC030005-001 Revision: -162© Copyright 2006 ABB. All rights reserved.4.4.3. Replacement of Ejector UnitGeneralThis section describes replacement of Ejector Unit.DANGER!Turn off all electrical power, hydraulic and pneumatic pressure supplies to the robot!Also read the safety sections:• Safety risks related to pneumatic/hydraulic systems on page 18• Risks associated with live electric parts on page 20• Safety risks during installation and service work on robot on page 15Locationxx0700000545Required Equipment and ReferencesA AttachmentB BracketC Hexagon head screw, M8x35 (Steel 8.8-A2F)D Ejector UnitE Hexagon bolt with flange, M6 x 20 (A2 DIN6921)Equipment Spare Part No. NoteStandard toolsContinues on next page
