2.3.2 TransportGeneralThis section describes how to transport the manipulator.NoteThe transport shall be made by qualified personnel and should conform to allnational and local codes.Transport positionWhenever the manipulator is transported, it must be in mounting position. It is notallowed to turn the manipulator up side down.When air transport is used, the robot must be located in a pressure-equalized area.WARNINGThe center of gravity for IRB 360 during transport is very high, 804-810 mm fromthe bottom. It might tilt and fall when carried on a forklift.Continues on next pageProduct manual - IRB 360 533HAC030005-001 Revision: U© Copyright 2008-2018 ABB. All rights reserved.2 Installation and commissioning2.3.2 Transport
