2.3.2 Lifting and turning a suspended mounted robotValidity of this sectionThis section is only valid for IRB 2600-20/1.65, IRB 2600-12/1.65, IRB 2600-12/1.85,IRB 2600ID-15/1.85, IRB 2600ID-8/2.0.IntroductionHow to lift and turn the robot to a suspended position using the turning accessoryis described in the lifting instruction delivered with the turning accessory. Articlenumbers for the accessory and the instruction is specified in Special tools onpage 442. Any additional equipment required is specified in the instruction for thelifting accessory. Contact ABB for more information.How to lift and turn the robot into position for wall position: Contact ABB for moreinformation.How to lift and turn the robot into position for tilted position: Contact ABB for moreinformation.Illustrationxx1500002117Product manual - IRB 2600 633HAC035504-001 Revision: Q© Copyright 2009-2018 ABB. All rights reserved.2 Installation and commissioning2.3.2 Lifting and turning a suspended mounted robot