OneStart
Menu
Home
Features
Browser
Content
Partner
Coupons
Manuals
Blog
Download
Search
Manuals database
Brands
ABB
Robotics
IRB 2400
ABB IRB 2400/L Product Manual
ABB IRB 2400/L Product Manual
Also see for IRB 2400:
Operating manual
Instructions
Table of content
Contents
Table Of Contents
Table Of Contents
Table Of Contents
Overview of this manual
How to read the product manual
Product documentation, M2000/M2000A
Product documentation, IRC5
Safety
Protective stop and emergency stop
Safety actions
Emergency release of the robot axes
Make sure that the main power has been switched off
Safety risks
Moving robots are potentially lethal
First test run may cause injury or damage
Work inside the working range of the robot
Enabling device and hold-to-run functionality
Risks associated with live electric parts
The unit is sensitive to ESD
Hot parts may cause burns
Safety risks related to pneumatic/hydraulic systems
Brake testing
Safety risks during handling of batteries
Safety risks during work with gearbox lubricants (oil or grease)
Safety signals and symbols
Safety symbols on product labels
Installation and commissioning
Unpacking
Working range
Risk of tipping/stability
On-site installation
Manually releasing the brakes
Orienting and securing the robot
Mounting the robot in suspended position
Loads fitted to the robot, stopping time and braking distances
Signal lamp (option)
Setting the system parameters for a suspended or tilted robot
Restricting the working range
Mechanically restricting the working range of axis 1
Mechanically restricting the working range of axis 2
Installation of limit switch, axis 3
Electrical connections
Robot cabling and connection points
Start of robot in cold environments
Maintenance
Maintenance schedule
Inspection activities
Inspecting Signal lamp (option)
Changing activities
Oil change, gearbox axes 5-6 (wrist unit)
Replacement of SMB battery
Cleaning activities
Service Information System, M2000
Description of Service Information System (SIS)
SIS system parameters
Setting the SIS parameters
Reading the SIS output logs
Exporting the SIS data
Repair
General procedures
Mounting instructions for bearings
Mounting instructions for seals
Cut the paint or surface on the robot before replacing parts
The brake release buttons may be jammed after service work
Complete robot
Replacement of cable harness, axes 4-6
Upper arm
Replacement of wrist IRB 2400L
Replacement of complete upper arm
Lower arm
Replacement of tie rod
Frame and base
Replacement of brake release unit
Replacement of parallel arm
Motors
Replacement of motor, axis 2
Replacement of motor, axis 3
Replacement of motors, axes 4-6, IRB 2400L
Replacement of motors, axes 4-6, IRB 2400/10/16
Gearboxes
Replacement of drive shaft unit, IRB 2400L
Calibration information
Calibration methods
Synchronization marks and synchronization position for axes
Calibration movement directions for all axes
Updating revolution counters
Checking the synchronization position
Product manual - IRB
Decommissioning
Scrapping of robot
Reference information
Applicable standards
Unit conversion
Screw joints
Weight specifications
Standard tools
Special tools
Lifting equipment and lifting instructions
Spare part lists
Circuit diagram
Index
Also note that:
•
Spills can form a film on water surfaces causing damage to organisms.
Oxygen transfer could also be impaired.
•
Spillage can penetrate the soil causing ground water contamination.
218
Product manual - IRB 2400
3HAC022031-001 Revision: P
© Copyright 2004-2018 ABB. All rights reserved.
6 Decommissioning
6.1 Environmental information
Continued
Previous
Next
/ 242
Related manuals for ABB IRB 2400
ABB IRB 2400/L Product Manual
ABB IRB 1400 Product Manual
ABB IRB 2600 Product Manual
ABB IRB 14000 Product Manual
ABB IRB 14000 Product Manual
ABB IRB 14000 Product Manual
ABB IRB 260 Product Manual
ABB IRB 260 Product Manual
ABB IRB 4400 - 45 Product Manual
ABB IRB 1200 Product Manual
This manual is suitable for:
IRB 2400
IRB 2400 Series
IRB 2400/10
IRB 2400/16
IRB 2400/L