140 XVR16*4th Generation Intel® Core™ i7 Based Rugged VME Single Board Computer Publication No. 500-9300007876-000 Rev. C.0B.4 Chipset Setup MenuSelect the various options for chipsets located in the system (for example, the CPUconfiguration and configurations for the North and South Bridge). The settingsfor the chipsets are processor dependent and care must be used when changingsettings from the defaults set at the factory.Below is a sample of the Chipset Setup screen; the actual options on your systemmay vary.NOTEChanges in this screen can cause the system to malfunction. If problems are noted after changes havebeen made, reboot the system and access the BIOS firmware. From the Exit menu select ‘Load FailsafeDefaults’ and reboot the system. If the system failure prevents access to the BIOS firmware screens,refer to Section 4.2.1 Clear CMOS/RTC/Password on page 33 for instructions on clearing the CMOS.Table B-4 BIOS Chipset Menu
