6-13Phaser 3635MFP GP 5, GP 6General Procedures and InformationDraft 4Fax OptionsThis report shows the different options available for the fax and their current settings.Billing/MetersThis report shows specific information about the machines total print count.AuditronThis report shows the active electronic auditron group accounts and their current imagecounters for each available service.Xerox Standard AccountingThis report shows the user account activity. Reports are available for user accounts, generalaccounts and group accounts.All Accounting ReportsThe machine will print the Auditron list and Xerox Standard Accounting list.Email ConfirmationThis report prints after connecting to the mail server.All Email ReportsThis function will print all available Email reports.GP 6 Firmware UpgradePurposeTo give details of the firmware upgrade procedure.ProcedureThe firmware upgrade is initiated locally from a USB thumbdrive through the standard thumb-drive port.Perform the following:1. Load the firmware onto a USB thumbdrive.2. Connect the USB thumbdrive to the standard thumbdrive port on the front of the machine.3. Select Print from USB.4. Select USB Drive.5. From the displayed list, navigate to the relevant firmware file. Select the firmware file.6. Select Add. The firmware file will be added to the print list.7. Select Done. The print list will be displayed.8. Select the firmware file to be downloaded to the machine. Select Add.9. After the firmware has been upgraded, check that the correct version is displayed inMachine Status. Refer to GP 3 Machine Status.
