Printing134 WorkCentre 7800 Series Multifunction PrinterSystem Administrator GuideLaunching Xerox® Printer ManagerTo launch Xerox ® Printer Manager from a terminal window prompt as root, type xeroxprtmgr, then pressEnter or Return.Printing from a Linux WorkstationTo print from a Linux workstation, install either a Xerox ® print driver for Linux or a CUPS print driver. Youdo not need both drivers.Xerox recommends that you install one of the full-featured custom print drivers for Linux. To locatedrivers for your printer, see www.xerox.com/office/drivers.If you use CUPS, ensure that CUPS is installed and running on your workstation. The instructions forinstalling and building CUPS are contained in the CUPS Software Administrators Manual, written andcopyrighted by Easy Software Products. For complete information on CUPS printing capabilities, refer tothe CUPS Software Users Manual available from www.cups.org/documentation.php.Installing the PPD on the Workstation1. Download the Xerox ® PPD for CUPS from the Drivers and Downloads page on the Xerox ® Supportwebsite.2. Copy the PPD into the CUPS ppd/Xerox folder on your workstation. If you are unsure of the locationof the folder, use the Find command to locate the PPD files.3. Follow the instructions that are included with the PPD.Adding the Printer1. Verify that the CUPS daemon is running.2. Open a Web browser and type http://localhost:631/admin, then click Enter or Return.3. For User ID, type root. For password, type the root password.4. Click Add Printer and follow the onscreen prompts to add the printer to the CUPS printer list.Printing with CUPSCUPS supports the use of both the System V (lp) and Berkeley (lpr) printing commands.1. To print to a specific printer in System V, type: lp -dprinter filename, then click Enter.2. To print to a specific printer in Berkeley, type: lpr -Pprinter filename, then click Enter.
