PrintingWorkCentre 7755/7765/7775 Multifunction PrinterUser Guide67Printing BookletsWith 2-sided printing, you can print a document in the form of a small book. Create booklets for anypaper size that is supported for 2-sided printing. The driver automatically reduces each page imageand prints four pages per sheet of paper (two on each side). The pages are printed in the correct orderso that you can fold and staple the pages to create a booklet.Notes:• Automatic folding requires the optional Professional Finisher or the optional LightProduction Finisher.• Booklets can be created using 8.5 x 11 in. (A4 210 mm x 297 mm) paper and 11 x 17 in. (A3 297mm x 420 mm) paper.When you print booklets, you can specify the creep and gutter in supported drivers.• Gutter: Specifies the horizontal distance (in points) between the page images. A point is 0.35 mm(1/72 in.).• Creep: Specifies how much the page images are shifted outward (in 10ths of a point). Thiscompensates for the thickness of the folded paper, which otherwise would cause the page imagesto shift slightly outward when folded. You can select a value from zero to 1.0 points.Selecting Booklet Printing in a Supported Driver Using a Booklet MakerWindows1. In the printer driver, click the Paper/Output tab, click the arrow to the right of Finishing, thenselect Booklet Creation.2. In the Booklet Creation window, under Booklet Finishing, do one of the following:• Click None: no folding or stapling.• Click Booklet Fold: bi-fold, 5 sheets maximum.• Click Booklet Fold and Staple: bi-fold and saddle staple, 15 sheets maximum.Gutter Creep
