Network InstallationXerox WorkCentre 5735/5740/5745/5755/5765/5775/5790System Administrator Guide82DNS/DDNS Configuration1. From the Tools pathway, touch [Network Settings].2. Touch [Network Setup].3. Touch [TCP IP].4. Touch [TCP/IP Settings].5. Touch [DNS Configuration], the DNS Configuration screen displays.Note: This feature will be inaccessible (grayed out) if TCP/IP protocol is not enabled.a. Touch the [Domain Name] button.b. Touch the bar under Domain Name.c. Touch the [Clear Text] button to remove the default name before entering the new nameusing the on screen keyboard.d. Touch [Save].e. Touch [Save] to return to the DNS Configuration screen.6. Touch [Preferred DNS Server].a. Touch each octet under the title and enter the Preferred DNS IP server address using thenumerical keypad.b. Touch [Save], then touch [Close].7. Touch [Alternate DNS Servers] if required.a. Touch the button under Alternate DNS Server, enter the Alternate DNS Server IP Addressusing the on-screen keypad.b. Touch [Save] to return to the DNS Configuration screen.Note: If DHCP is enabled, the Alternate DNS server information is not available as a featuresummary.Enable Dynamic DNS RegistrationNote: If your DNS server does not support dynamic updates, then this function does not need tobe enabled.8. Touch [Dynamic DNS Registration].a. Touch [Enable], then [Save] to return to the DNS Configuration screen.9. Press the button.10. Touch [Logout] to exit the Tools pathway.Configure Dynamic AddressingInformation ChecklistBefore starting the procedure, ensure the following items are available or tasks have been performed:• Existing operational network utilizing the TCP/IP protocol.• DHCP or BOOTP Server should be available on the network.• Device must be connected to the network via Ethernet Cable.
