3 CopyXerox WorkCentre 4250/4260 User Guide 472-Sided CopyingDouble-sided copies can be made automatically from one or two-sided originals.1 1 Sided: Use this option for 1 sided originals when 1 sided copies are required.1 2 Sided: Use this option for 1 sided originals when 2 sided copies are required.1 2 Sided, Rotate Side 2: This option produces 2-sided copies from 1 sidedoriginals and rotates 180 degrees every second side image. Use this option tocreate documents which can be read in a “head to toe” manner, for example acalendar.2 2 Sided: Use this option for 2 sided originals when 2 sided copies are required.2 1 Sided: Use this option for 2 sided originals when 1 sided copies are required.2 1 Sided, Rotate Side 2: This option produces 1 sided copies from 2 sidedoriginals and rotates 180 degrees every second side image. The “read” orientationfor this option varies depending on the input originals. For example, if “head tohead” orientation originals are scanned, the output will be “head to toe”. If “headto toe” orientation originals are scanned, the output produced will be “head tohead”.2 2 Sided, Rotate Side 2: This option produces 2 sided copies from 2 sidedoriginals and rotates 180 degrees every second side image.Copy OutputOutput is used to select the finishing requirements for the job. The options willdepend on the finishing output device installed.Collated: Select Collated for output stacked in sets to match the sequence of theoriginals, i.e. (1,2,3 / 1,2,3).Uncollated: Select Uncollated for output sorted into stacks of individual pages, i.e.(1,1,1 / 2,2,2 / 3,3,3).1 Staple Portrait: Select the appropriate button to insert a single staple into thetop left corner of a portrait document.1 Staple Landscape: Select the appropriate button to insert a single staple into thetop left corner of a landscape document.
