1 WelcomeXerox WorkCentre 4250/4260 User Guide 7SafetyRead these safety notes carefully before using this product to ensure you operatethe equipment safely.Your Xerox product and supplies have been designed and tested to meet strictsafety requirements. These include Safety Agency approval, and compliance toestablished environmental standards. Please read the following instructionscarefully before operating the product and refer to them as needed to ensure thecontinued safe operation of your product.The safety testing and performance of this product have been verified usingXEROX materials only.Follow all warnings and instructions marked on, or supplied with the product.This WARNING mark alerts users to the possibility of personal injury.This WARNING mark alerts users to heated surfaces.WARNING: This symbol indicates a Laser is being used in the equipment andalerts the user to refer to the appropriate safety information.WARNING: This product must be connected to a protective earthing circuit.Operator Accessible AreasThis equipment has been designed to provide operator access to safe areas only.Operator access to hazardous areas is restricted using covers or guards, whichrequire a tool to enable removal. Never remove these covers or guards.Maintenance Information1. Any operator product maintenance procedures will be described in the userdocumentation supplied with the product.2. Do not carry out any maintenance on this product which is not described inthe customer documentation.WARNING: Do not use aerosol cleaners. Aerosol cleaners can be explosive orflammable when used on electromechanical equipment.3. Use supplies and cleaning materials only as directed in the Operator sectionof this manual.
