Operational SafetySafety Notes v viiOperational SafetyYour printer and supplies were designed and tested tomeet strict safety requirements. These include safetyagency examination, approval, and compliance withestablished environmental standards.Your attention to the following safety guidelines will helpto ensure the continued safe operation of your printer.• Use the material and supplies specifically designed foryour printer. The use of unsuitable materials may resultin poor performance and possibly a hazardoussituation.• Follow all warnings and instructions marked on, orsupplied with, the printer, options and supplies.• Place the printer in a dust free area where thetemperature range is 41° F to 95° F (5° C to 35° C) andthe relative humidity is 15% to 85%.• Place the printer in an area where there is adequatespace for ventilation, operation and servicing. Therecommended minimal spacing is 24 in. (600 mm) infront of and behind the printer, and 8 in. (200 mm) oneach side of the printer. Do not block or cover the slotsand openings on the printer. Without adequateventilation, the printer may overheat.
