Xerox DocuPrint N2125 System Administrator Manual

Also see for DocuPrint N2125: Product reference guide Specification sheet User guide User guide Service manual

Contents

Xerox DocuPrint N2125 System Administrator Manual Manual pdf 39 page image

Using the Menu SystemChapter 1: Configuring the Printer v 1-23Refer to Table 1.10 on page 1-24 for step-by-stepprocedures.Tray Menu(continued)Plain Sets the fuser temperature to be associated with the papertype Plain (appears only if Config Fuser is set to On).Preprinted Sets the fuser temperature to be associated with the papertype Preprinted (appears only if Config Fuser is set to On).Letterhead Sets the fuser temperature to be associated with the papertype Letterhead (appears only if Config Fuser is set to On).Prepunched Sets the fuser temperature to be associated with the papertype Prepunched (appears only if Config Fuser is set to On).Labels Sets the fuser temperature to be associated with the papertype Labels (appears only if Config Fuser is set to On).Bond Sets the fuser temperature to be associated with the papertype Bond (appears only if Config Fuser is set to On).Recycled Sets the fuser temperature to be associated with the papertype Recycled (appears only if Config Fuser is set to On).Color Sets the fuser temperature to be associated with the papertype Color (appears only if Config Fuser is set to On).Cardstock Sets the fuser temperature to be associated with the papertype Cardstock (appears only if Config Fuser is set to On).User type N Sets the fuser temperature to be associated with the custompaper type of User type n (appears only if Config Fuser is setto On and the paper type has been defined throughCentreWare).Table 1.9 Tray Menu ItemsMenu DescriptionTable 1.9 Page 2 of 2