Xerox DocuPrint N2125 System Administrator Manual

Also see for DocuPrint N2125: Product reference guide Specification sheet User guide User guide Service manual

Contents

Xerox DocuPrint N2125 System Administrator Manual Manual pdf 38 page image

Using the Menu System1-22 v System Administrator GuideTray Menu The Tray Menu and its available items are described inTable 1.9.Table 1.9 Tray Menu ItemsMenu DescriptionTray Menu Allows you to access tray settings for PCL and PostScript jobs.Menu Items DescriptionMBF Size Defines the paper size that is loaded in the MBF.MBF Type Defines the paper type that is loaded in the MBF.Envelope Size Defines the paper size that is loaded in the optional envelopefeeder.Envelope Type Defines the paper type that is loaded in the optionalenvelope feeder.Tray N Type Defines the type of paper installed in Tray N (where N is thetray number—Tray 1, 2, or 3).Tray Sequence Groups two or more trays together so the group appears asone logical tray, and defines the order in which the trays willbe searched to satisfy the input request.Custom Size Defines the paper size that is used in formatting pagesprinted from the tray(s) if Tray N Mode is set to Custom(which overrides the tray’s auto size detection mechanism).Tray N Mode Determines whether or not the auto size detectionmechanism in tray N (where N is the tray number—Tray 1, 2,or 3) should be overridden with the setting for Custom Size.Config Fuser Enables the customization of fuser temperature settingsassociated with each paper type (otherwise set automaticallyby the printer). When set to On, each paper type is availableas a menu item to customize its fuser temperature.Table 1.9 Page 1 of 2