4.2 Description of Menu Items 77PostScript SettingsSpecifies the settings related to PostScript.Note• The DocuPrint C2100 does not support PostScript.2 Sided Specifies the 2 sided printing settings.• [2 Sided Print]Specifies whether to perform 2 sided printing. The default is [Off].• [Binding Edge]Specifies the binding direction from [Long Edge Flip] or [Short Edge Flip]. The defaultis [Long Edge Flip].Font Specifies the font used. The default is [Courier].Symbol Set Specifies the font for symbols. The default is [ROMAN-8].Font Size Specifies the font size. The default is [12.00]. You can specify a value between 4.00 and50.00 in increments of 0.25.Font Pitch Specifies the character spacing. The default is [10.00]. You can specify a value between6.00 and 24.00 in increments of 0.01.Form Lines Specifies the form line (the number of lines per form). The default is [64]. You canspecify a value between 5 and 128 in increments of 1.Quantity Specifies the copies to be printed between 1 to 999. The default is [1].Image Enhance Selects whether to perform image enhancement.Image enhancement is a feature that makes the boundary line between black and whitesmoother to decrease jags and enhance the visual appearance. The default is [On].HexDump Specifies whether to print the data sent from a computer in the ASCII codecorresponding to the hexadecimal notation format in order to check the data contents.The default is [Disable].Draft Mode Specifies whether to print in draft mode. The default is [Disable].Line Termination Sets the line termination.• [Off] (default)The line termination command is not added.CR=CR, LF=LF, FF=FF• [Add-LF]The LF command is added.CR=CR-LF, LF=LF, FF=FF• [Add-CR]The CR command is added.CR=CR, LF=CR-LF, FF=CR-FF• [CR-XX]The CR and LF commands are added.CR=CR-LF, LF=CR-LF, FF=CR-FFOutput Color Specifies the color mode to Color or Black. This settings is used when the color printingmode setting is not specified for the print job that is sent to the printer.• [Black] (default)Prints in black and white mode.• [Color]Prints is the color mode.Item DescriptionPS Error Report Sets whether to print an error report in case of a PostScript error.• [On] (default)• [Off]Note• After changing this setting, reboot the printer.Item Description
