62 3 About PaperSetting Paper TypesImportant• Paper type settings must match those of the actual paper loaded in the trays. Otherwise, image qualitycannot be processed accurately. Toner may not fuse properly on the paper, resulting in dirty and poorquality printouts.Refer to• “Usable Paper” (P. 54)1. Press the 2. Check that [Tray Settings] is displayed, then press the < > or button.3. Press the < > or < > button until the required tray is displayed, then press the < >or button.4. Press the < > or < > button until [Paper Type] is displayed, then press the < > or button.5. Press the < > or < > button until the correct paper type is displayed for the loadedpaper, then press the button.6. Press the Setting Paper SizesRefer to• “Usable Paper” (P. 54)1. Press the 2. Check that [Tray Settings] is displayed, then press the < > or button.3. Press the < > or < > button until the required tray is displayed, then press the < >or button.4. Press the < > or < > button until [Paper Size] is displayed, then press the < > or button.5. Press the < > or < > button until the correct paper size and direction are displayedfor the loaded paper, then press button.Note• When using custom sized paper, select [Custom Size] and specify the X and Y sizes.6. Press the
