38 2 PrintingSending E-mailsSupported E-mail AttachmentsFiles of the following format can be attached to e-mails:• PDF filesTo Send E-mailsTo perform E-mail Print, enter the printer’s address in the “To:” field on your e-mailapplication.Then, enter the following commands in the subject field or in the body message and writethe text or attach the PDF file you want to print.Note• The method of sending e-mails varies depending on the application being used. Consult thedocumentation for your e-mail application.• Set the e-mail format to “Text” instead of “HTML”. This feature does not support “HTML” format. To Specify Commands in the Body MessageThe following commands can be specified in the body message.The subject can be whatever you likeExampleFollow these guidelines when entering commands on e-mails.• Commands are not case sensitive.• If [Password for Print Job] is set, start your e-mail with "#Password".• Prefix each command with "#". Command that does not start with "#" will be ignored.• Place only one command per line and separate each command or parameter with aspace or a tab.• When the same command is entered more than one time in one e-mail, only the first onewill be valid and the rest will be ignored.Command Parameter Description#Password Password When [Password for Print Job] is set, make sure to start youre-mail with this command. When the password is not set, youdo not need to enter this command.#Print (None) This command prints the text entered after the "#Print".When a PDF file is attached to the e-mail, this commandalso prints the file.
