Xerox DocuMate 250 Installation Manual

Also see for DocuMate 250: Hardware replacement guide User guide User guide

Contents

Xerox DocuMate 250 Installation Manual Manual pdf 21 page image

DocuMate 250 Scanner Installation Guide 15Scanning with the Scanner ButtonCreating a New Button ConfigurationYou cannot change settings of the preset (default) configurations.To use settings other than those offered by the presetconfigurations, you must create a new configuration. You can dothis either by copying a preset configuration and making thedesired changes or by creating a new configuration from scratch.To create a new configuration:1. Scroll the applications in the Select Destination list and clickthe application for which you want to create a newconfiguration.2. Do one of the following:• Click the New button.• Select a preset configuration and click the Copy button.3. On the New Scan Configuration dialog box, type a name.• If you are copying from a preset configuration, leave thename as is or change it as required.4. Select scan settings for the new configuration.Mode—Select a scanning mode as follows:• Black/White to scan in black and white. For example, lettersand memos are usually scanned in black and white.• Grayscale to scan items such as documents containingdrawings or black and white photographs. The scanningproduces an image in varying shades of gray.NOTE: If you select a printer or other device in the SelectDestinations list, the dialog box may have an additional tab forsetting specific options for the particular device.